 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) ST9293 48K ROM HCMOS MCUs WITH ON SCREEN DISPLAY AND A/D CONVERTER FUNCTIONAL DESCRIPTION Register oriented 8/16 bit CORE with RUN, WFI and HALT modes Minimum instruction cycle time: 500ns (12MHz internal) 16 to 48K bytes of ROM, 256 to 768 bytes of RAM, 224 general purpose registers available as RAM, accumulators or index registers (Register File) 42-lead Shrink DIP package Interrupt handler and Serial Peripheral Interface as standard features 31 fully programmable I/O pins 34 character x15 rows software programmable On Screen Display module with colour, italic, underline, flash, transparent and fringe attribute options 16 bit Timer with 8 bit Prescaler, able to be used as a Watchdog Timer 16-bit programmable Slice Timer with 8-bit prescaler 4 channel Analog to Digital Converter, with integral sample and hold, fast 5.75s conversion time, 6-bit guaranteed resolution Rich Instruction Set and 14 Addressing modes Division-by-Zero trap generation Versatile Development tools, including assembler, linker, C-compiler, archiver, graphic oriented debugger and hardware emulators Real Time Operating System Windowed EPROM parts available for prototyping and pre-production development phases (Ordering Information at the end of the Datasheet) PSDIP42 DEVICE SUMMARY Device ST9293J7 ST9293J5 ST9293J3 ST9293J1 ROM 48K 32K 24K 16K RAM 768 640 512 256 PACKAGE PSDIP42 PSDIP42 PSDIP42 PSDIP42 May 1993 This is Preliminary Data from SGS-THOMSON. Details are subject to change without notice. 1/4 ST9293 1.1GENERAL DESCRIPTION The ST9293 is a ROM member of the ST9 family of microcontrollers, completely developed and produced by SGS-THOMSON Microelectronics using a proprietary n-well HCMOS process. The ROM parts are fully compatible with their EPROM versions, which may be used for the prototyping and pre-production phases of development, and can be configured as standalone microcontrollers with 48K/32K/24K/16 bytes of onchip ROM. The nucleus of the ST9293 is the advanced Core which includes the Central Processing Unit (CPU), the Register File, a 16-bit Timer/Watchdog with 8bit Prescaler, a Serial Peripheral Interface supporting S-bus, I2C-bus and IM-bus Interface, plus two 8-bit I/O ports. The Core has independent memory and register buses allowing a high degree of pipelining to add to the efficiency of the code execution speed of the extensive instruction set.The powerful I/O capabilities demanded by microcontroller applications are fulfilled by the ST9293 with up to 31/41 I/O lines dedicated to digital Input/Output. These lines are grouped into up to six I/O Ports and can be configured on a bit basis under software control to provide timing, status signals, timer inputs and outputs, analog inputs, external interrupts and serial or parallel I/O. Three basic memory spaces are available to support this wide range of configurations: Program Memory, Data Memory and the Register File, which includes the control and status registers of the on-chip peripherals. The 16-bit Slice Timer with an 8-bit Prescaler and 6 operating modes allows simple use for waveformgeneration and measurement, PWM functions and many other system timing functions. The human interface is provided by the On Screen Display module, this can produce up to 8 lines of of up to 34 characters from a ROM defined 128 character set. The 9x13 character can be modified by 4 different pixel sizes, with character rounding, and formed into words with colour and format attributes. In addition there is a 4 channel Analog to Digital Converter with integral sample and hold, fast 5.5s conversion time and 6-bit guaranteed resolution. Figure 1-1. ST9293 Block Diagram 16 to 48k x 8 ROM J7 J5 J3 J1 ROM RAM 48K 768 32K 640 24K 512 16K 256 256 to 768 RAM 256 Bytes REGISTER FILE 16-Bit TIMER / WATCHDOG + SPI CPU SLICE TIMER MEMORY BUS ( Address & Data ) REGISTER BUS ( Address & Data ) I/O PORT 0 I/O PORT 2 ( SPI ) ON SCREEN DISPLAY I/O PORT 3 A/D CONVERTER I/O PORT 4 ( Analog Inputs ) I/O PORT 5 ( Control Bus ) ( Colour ) 7 8 8 PLL 5 3 VSYNC HSYNC PLLR PLLF AVD D VR0B1749 2/4 (R) ST9293 1.2 PIN DESCRIPTION VSYNC. Vertical Synch. Vertical video synchronisation input to OSD. Positive or negative polarity. HSYNC. Horizontal Synch. Horizontal video synchronisation input to OSD. Positive or negative polarity. PLLF. PLL Filter input. Filter input for the OSD for PLL feed-back. PLLR. PLL Resistor connection pin. For resistor connection to select the PLL gain adjust. RESET. Reset (input, active low). The ST9 is initialised by the Reset signal. With the deactivation of RESET, program execution begins from the Program memory location pointed to by the vector contained in program memory locations 00h and 01h. OSCIN, OSCOUT. Oscillator (input and output). These pins connect a parallel-resonant crystal (24MHz maximum), or an external source to the on-chip clock oscillator and buffer. OSCIN is the input of the oscillator inverter and internal clock generator; OSCOUT is the output of the oscillator inverter. AVDD. Analog VDD of PLL. This pin must be tied to VDD externally to the ST9293. VDD. Main Power Supply Voltage (5V10%) VSS, VSS2. Digital Circuit Ground, these pins must be connected together externally to the ST9293. P0.0-P0.7, P2.0-P2.7, P3.3-P3.7, P4.5-P4.7, P5.0-P5.6 I/O Port Lines (Input/Output, TTL or CMOS compatible). 31 lines grouped into I/O ports, bit programmable under program control as general purpose I/O or as Alternate functions (see next section). P3.3 and P3.4 are true 12V open drain outputs when set in output mode. 1.2.1 I/O Port Alternate Functions. Each pin of the I/O ports of the ST9293 may assume software programmable Alternative Functions as shown in the Pin Configuration Drawings. Table 1 shows the Functions allocated to each I/O Port pin. Table 1-1. ST9293 I/O Port Alternate Function Summary I/O PORT Port.bit P0.0 P0.1 P0.2 P0.3 P0.4 P0.5 P0.6 P0.7 P2.0 P2.1 P2.2 INT6 INT7 INT0 I/O I/O I/O I/O I/O I/O I/O I/O I I I External Interrupt 6 External Interrupt 7 External Interrupt 0 Name Function Alternate Function Pin Assignment 9293J 12 11 10 9 8 7 6 5 39 40 41 3/4 (R) ST9293 PIN DESCRIPTION (Continued) Table 1-2. ST9293 I/O Port Alternate Function Summary I/O PORT Port.bit P2.3 P2.4 P2.4 P2.5 P2.6 P2.6 P2.7 P2.7 P3.3 P3.3 P3.4 P3.4 P3.5 P3.6 P3.6 P3.7 P4.5 P4.6 P4.7 P5.0 P5.1 P5.2 P5.3 P5.4 P5.5 P5.6 FB B G R SLIN INT4 WDIN AIN4 NMI AIN5 AIN6 AIN7 SLOUT INT3 WDOUT EXTRG SDO INT2 SCK SDO SDI I O I O I O O I O O O I I I I I I I I I/O I/O I/O O O O O Fast Blanking OSD output Blue Video Colour OSD output Green Video Colour OSD output Red Video Colour OSD output External Interrupt 3 T/WD Output External A/D Trigger MSPI Serial Data Output External Interrupt 2 SPI Serial Clock SPI Serial Data Output SPI Serial Data Input (12V Open Drain Output) Slice Timer Output (12V Open Drain Output) Slice Timer Input Schmitt Triggered Input Only T/WD Input A/D Analog Input 4 Non-Maskable Interrupt A/D Analog Input 5 A/D Analog Input 6 A/D Analog Input 7 Name Function Alternate Function Pin Assignment 9293J 42 1 1 2 3 3 4 4 34 34 35 35 36 37 37 38 27 28 29 14 15 16 17 18 19 20 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without the express written approval of SGS-THOMSON Microelectronics. (c) 1995 SGS-THOMSON Microelectronics - All rights reserved. Purchase of I C Components by SGS-THOMSON Microelectronics conveys a license under the Philips I C Patent. 2 2 Rights to use these components in an I C system is granted provided that the system conforms to the I C Standard Specification as defined by Philips. SGS-THOMSON Microelectronics Group of Companies Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. 4/4 (R) 2 2 |
Price & Availability of ST9293
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |